Momo Prototipo 350mm - Black / Black
Momo Competition 350mm - Black / Black
Momo Mod.07 - 350mm w/ leather suede ring Black / Black.  This is the 911, 964, 993, 996 RSR
Aluminum Blower Assembly Cover   

Fits:  All 911/930/912 from 1965-89

This is a direct replacement of that cardboard piece that the factory installed in your car. Constructed
from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for
installation is included.  Available in 3 different models, for cars with or without power assist brakes, and
right hand drive models w/ power assist brakes.  Silver and black finishes are optional.
Interior Door Handles

Fits:  911/912/930/C2/C4/993 All - 1974-98

series aluminum and attach with all factory hardware.  Sold as a pair.  Made by Rennline USA.
Available in perforated (shown) or solid (no holes), with anodized silver or black finish.
Tapered Steering Wheel Quick Disconnect

Fits Momo, Sparco, and OMP steering wheels with matching hubs.

Features all of the exact details from the quick disconnect listed above.  In addition, this hub
onto the socket.  Although both products place the steering wheel in the proper rack and pinion
orientation, the tapered design guides the steering wheel onto the socket without any binding or
misalignment.  Hub adaptor required.  Mounting ends are anodized black.  Release lever is
available in red (pictured) or black.
$375.00
Finish Model
$95.00
$75.00
Finish
Style
Aluminum Pedal Sets
We proudly offer USA pedal covers that have been designed to give you ultimate pedal control and
comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip
when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our
pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are
constructed of aircraft grade aluminum and all stainless steel hardware.  Pedal sets are available in 3
piece (throttle, brake, and clutch) and 4 piece (throttle, brake, clutch, and dead pedal).  Choose a finish
of silver anodized, silver brushed, or black.  Select your car model.
$135.00 Model
Select
Floor Board / Driver Side

If you are looking to replace your broken or rotten out wood floor boards then these are the solution.  
Aircraft grade aluminum floor boards that will last forever. These floorboards are very light weight and
install in minutes. They’re exact replicas of the original floorboards without the need to ever replace them.  
Available in two styles, perforated (pictured) or solid.  Finishes are offered in silver or black.
$125.00 Model
Style
Floor Board / Passenger Side

If you are looking to replace your broken or rotten out wood floor boards then these are the solution.  
Aircraft grade aluminum floor boards that will last forever. These floorboards are very light weight and
install in minutes. They’re exact replicas of the original floorboards without the need to ever replace them.  
Available in two styles, perforated (pictured) or solid.  Finishes are offered in silver or black.
$75.00 Model
Style
Gauge Bezel Kit

Aluminum gauge bezels are a quick and easy way to brighten up your car's interior. These gauge
bezels are precision CNC machined from billet aluminum to assure perfect fit and quality. The bezels
are satin silver anodized and come with double-sided adhesive for a fast and reversible installation, so
you can return to the stock look in minutes without any damage to your original black bezels.
Smuggler's Box Cover

Fits:  911/912/930 All - 1965-89

These new Smuggler's Box covers are a direct replacement for your factory cover. Perfect for the light weight
race car or the performance street car. This is a ideal set up for those of you who have already relocated
your battery but need a clean way to finish off the project. All aluminum construction and a perfect location to
Available in Silver or Black.
Aluminum Lower Dash Cover

This super lightweight dash cover has been specifically designed to finish off that stripped out dash of
down. The dash panel comes with ignition and mounting holes only, custom holes can easily be added
during installation. All stainless steel hardware is included for an easy installation. Available in brushed
or black powder coat finish.
$125.00 Finish
$125.00
$125.00 Model
Finish
DZ 917 Style Throttle Pedal

Fits:  All 911, 930, and 912 from 66-89

This is a design for a throttle pedal that originated on the 917 & was utilized in many factory efforts to
include the legendary 935. The DNA from the mighty racers can be yours for daily driving or track use.
The World Championship of Makes throttle pedal assembly delivers the taste of history every time you hit
the loud pedal, from the classic good looks to the roll-on-power type of pedal operation.
DZ took the good and improved it, making the pedal with the correct tilt angle & new linkage to tie into the
factory pedal cluster behind the floor board.
The pedal is high grade aluminum, hand made in the USA, bead blasted for the right look then texture
powder coated to ensure rugged good looks with stain resistance from harsh use by your lead foot.
$160
Momo Prototipo 350mm - Black / Silver
Mod.7 wheel pictured with
blue quick disconnect
Interior & Accessories
$218.00
Select
Momo Hub Adapter Kit

MOMO steering wheel adapters use a unique design that incorporates a collapsible steel center section
for added safety, attached to a splined aluminum base that matches the spline on your steering shaft.
This is covered by a plastic bellows to give it a professional finished appearance.
Select
$89.00
Racing Seats

A professional grade race seat is a key component in driver comfort, stability, and safety of street and
race cars alike.  Adapters and sliders are also available for every seat.
Rebel S Racing (RSR Products) Carbon Fiber Upper Dash

fits:  66-89 911, 930, 912 and 90-98 993

Carbon fiber dash pad replacement.  Features a 2x2 twill weave carbon fiber layout with gloss finish.  
Manufactured as a very lightweight race car dash pad replacement.  
*Please note* windshield air vents are
un-trimmed for multi year / model applications while there is no A/C fresh air vent cutout, vents will need to be
trimmed as desired.  Dash is laid-up using a 2 piece mold, then bonded together, so there is a visible part line
across the gauge visor that continues straight across the passenger section to the right A-pillar.  We cover this
part line with black vinyl pinstripe to hide it.  This is a very difficult piece to manufacture without any imperfections,
so there may be some minor flaws in each one.  No guarantee is offered for absolute perfection.  We do our best
for good results.  As mentioned above, this is a race car dash, not intended for the absolute perfectionist.
This product is made to order with a 14 day manufacturing time.  Please call or email us to submit order.  $449
RSR Raised Tunnel Shift Tower
Professionally fabricated center tunnel re-positions any stock shifter or Rennshifter by raising it 4 inches and
moving it back 4 inches.  This brings the shifter to an ideal location close to the steering wheel, minimizing hand
movement and reach for all gear selections.  The tower includes all fastening hardware, weld on blind nuts, and
a provision to relocate the parking brake if desired.  A straight shift lever is recommended when using this tower,
you can bend a stock lever straight or purchase one of our machined billet levers.  We can say with confidence
that this setup provides the best shifting experience you have ever thought possible from a 65-89 chassis.
*Note that the stock tunnel must have a 1.5 inch wide by 7 inch long slot cut into it from the rear coupler opening
extending forward allowing for shift linkage rod clearance.     
$300.00